Assembly method

The juicer will only work if it is properly assembled.

1. Insert the juice filter into the rotating wiper.

The rotating wiper is only suitable for use with juice filters and smoothie filters. The rotating wiper will rotate smoothly when the filter is inserted correctly.

2. Make sure the silicone piece in the pulp extractor of the juicing jar is in the correct position. Once checked, lock the pulp outlet.

3. Place the juicing filter into the juicing bowl, aligning the red dots on each part.

When properly inserted into the bowl, the juice filter and rotating wiper will not move.

4. Insert the juicer screw into the center of the filter and push it down to sit.

The automatic juicing tank will not sit on the juicing bowl if the juicing screw is not pushed all the way down. The screw should be level with the top of the filter.

5. Place the automatic water tank on the juicing bowl so that the arrow symbol on the automatic water tank is aligned with the unlock symbol on the juicing bowl.

Rotate the automatic hopper clockwise until the arrow symbol is aligned with the lock symbol.

6. Place the assembled top assembly on the motor base.

The juice dispenser should be on the same side as the Kuvings logo.

7. Plug the power cord into the outlet and press the forward button to check if the juicer is on.

8. To open the lid automatically, use your thumb to push the locking bar on the handle up.

Opening the lid during operation will stop the juicer.

How to disassemble

Turn off the juicer and unplug the power cord from the outlet before disassembling it.

1. Press and hold the lock switch on the handle.
2. Rotate the auto-collection bin counterclockwise to align the arrow symbol with the unlock symbol.
3. Automatically lift the bucket out of the juicing bowl
4. Lift the juicer jar off the motor base.
5. Remove the rotating wiper, juice filter, and juice screw assembly from the juicing bowl.
6. Pull the juicing screw out of the juicing filter. You can also push the screw out from the bottom of the filter.
7. Pull the rotating wiper out of the water filter.